INSTRUCTIONS
Issue Card via Main (Master) Card: You can swipe card to issue it after swiping the main card in
advance.
Steps:
1. Swipe the main (master) card on the card reading area, and hear two beeps.
2. Swipe the unauthorized sub cards in turn after hearing a beep.
3. Swipe the main card again to end the card issuing process.
KEEP MASTER CARD SAFE
System Parameters | ||
---|---|---|
Internal card reader: | Built-in Card Reader | |
Processor: | Embedded MCU Processor |
Device Interfaces |
||
---|---|---|
Module-connecting: | 2(1 Input, 1 Output) |
General |
||
---|---|---|
Card type: | Mifare Card | |
Power output: | 12VDC(Powered for the other module) | |
Power input: | 12VDC(Powered by the other module) | |
DIP switch: | 8 | |
Installation: | Flush Mounting, Surface Mounting | |
Power Consumption: | ≤2W | |
Working Humidity: | 10% to 95% | |
Working Temperature: | -40° C to +60° C (-40° F to 140° F) | |
IP Protection Level: | IP65 | |
Dimensions(L × W × H): | 98.5mm×100mm×33.7mm(3.87″×3.95″×1.33″) |